Non-Destructive Evaluation of Defects and Damage in Composite Materials and Structures

M R Bhat

Abstract


The mechanical behaviour of composite materials differs from that of conventional structural materials owing to their heterogeneous and anisotropic nature. Different types of defects and anomalies get induced in these materials during the fabrication process. Further, during their service life, the components made of composite materials develop different types of damage. The performance and life of such components is governed by the combined effect of all these defects and damage. While porosity, voids, inclusions etc., are some defects those can get induced during the fabrication of composites, matrix cracks, interface debonds, delaminations and fiber breakage are major types of service induced damage which are of concern. During the service life of components made of composites, one type of damage can grow and initiate another type of damage. For example, matrix cracks can gradually grow to the interface and initiate debonds. Interface debonds in a particular plane can lead to delaminations. Consequently, the combined effect of different types of distributed damage causes the failure of the component.
A set of non-destructive evaluation (NDE) methods is well established for testing conventional metallic materials. Some of them can also be utilized for composite materials as they are, and in some cases with a little different approach or modification. Ultrasonics, Radiography, Thermography, Fiber Optics, Acoustic Emission Techniques etc., to name a few. Detection, evaluation and characterization of different types of defects and damage encountered in composite materials and structures using different NDE tools is discussed briefly in this paper.

Keywords


Composite Materials; Defects; Damage; Failure Mechanisms; NDE; DIC; Guided Wave Techniques

Full Text:

PDF

References


W. Hillger, “Ultrasonic Testing of Composites—from Laboratory Research to Field Inspections”, 15th world conference on Nondestructive Testing, Rome (Italy) 15–21 October 2000.

Abrate, Serge, “Impact on Laminated Composite Materials” ASME Applied Mechanics Review, Vol. 44, No. 4, April 1991, pp. 155–190.

Bhat, M.R. and Murthy, C.R.L., ‘Evaluation of Impact Induced Damage in Woven Fabric CFRP Laminates’, Jnl. of Aerospace Sciences and Technologies, 2003, Vol. 55, No. 2, pp. 144–152.

Bhat, M.R., Binoy, M.P., Surya, N.M., Murthy, C.R.L., Engelbart, R.W. ‘Non-destructive evaluation of porosity and its effect on mechanical properties of carbon fiber reinforced polymer composite materials’. Review of Progress in Quantitative Nondestructive Evaluation. AIP Conference Proceedings, Vol. 1430, pp. 1080–1087. American Institute of Physics, New York (2012).

Williams, J.H. and Lee, S.S. ‘Acoustic Emission Monitoring of Fiber Composite Materials and Structures’ Jl. of Composite Materials 12 October 1978, pp. 348–370.

Bhat, M.R., ‘Acoustic Emission Technique for Evaluation of Advanced Composite Materials’, Jnl. of Non Destructive Evaluation. Vol 20, No. 2, pp. 39–43, 2000.

Jess R. Richter, ‘Acoustic Emission Testing: A Composite Manufacturers Experience’, Materials Evaluation, Vol. 57, No. 5, May 1999.

ASM Materials Handbook, Vol. 17—Nondestructive Evaluation and Quality Control.

N.K. Ravikiran, A. Venkataramanaiah, M.R. Bhat and C.R.L. Murthy, ‘Detection and Evaluation of Impact damage in CFRP Laminates Using Ultrasound C-Scan and IR Thermography’, Proceedings of National Seminar NDE-06, Hyderabad, December, 2006 (Paper no. TP – 75).

Baskar Rao Mattapally, M.R. Bhat And Murthy C.R.L., ‘Health Monitoring of Composite Structures Based on Acoustic Wave Sensing Using Fiber Optic Sensors’ Proceedings of International Conference on Advanced NDE-ANDE , Korea—Nov 2007.

E. Udd, “An overview of fiber-optic sensors”, American Institute of Physics, Vol. 66, pp. 4015–4030, 1995.

C. Boller, “Ways and options for aircraft structural health management”, Smart materials and Structures, Vol. 10, pp. 432–440, 2001.

V. Guirguitiu, Structural Health Monitoring: with Piezoelectric Wafer Active Sensors, Academic press, USA, 2007.

V. Giurgiutiu, Embedded NDE with piezoelectric wafer active sensors in aerospace applications, Journal of Materials- Special issue on NDE, Jan 2003.

C.S. Wang, F. Wu, F.K. Chang, Structural health monitoring from fiber-reinforced composites to steel-reinforced concrete, Smart materials and Structures 10, pp. 548–552, 2001.

C.A. Paget, Sebastien Grondel, Klas Levin, Christophe Delabarre, Damage assessment in composites by Lamb waves and wavelet coefficients, Smart materials and Structures 12, pp. 393–402, 2003.

Z. Su, L. Ye, Y. Lu, Guided Lamb waves for identification of damage in composite strucutures: A Review, Journal of Sound and Vibration 295, pp. 753–780, 2006.

R. Gangadharan, D.R. Mahapatra, S. Gopalakrishnan, C.R.L. Murthy, M.R. Bhat, On the sensitivity of elastic waves due to structural damages: Time-frequency based indexing methid, Journal of Sound and Vibration 320, pp. 915–941, 2009.

I.A. Viktorov, Rayleigh and Lamb Waves—Physical Theory and Applications, Plenum press, Newyork, USA, 1967.

A.H. Nayfeh, Wave Propagation in Layered Anisotropic Media: With Application in Composites, Elsevier press, Amsterdam, Netherlands, 1999.

J.L. Rose, Ultrasonic Waves in Solid Media, Cambridge university press, Cambridge, UK, 1999.


Refbacks

  • There are currently no refbacks.